Magnets on the refrigerator with their own hands

Magnets on the refrigerator with their own hands

Magnets on the refrigerator are the elements that manyuse to decorate the refrigerator, some in order to use them to attach notes with reminders of some important things. Make magnets on the refrigerator is not difficult, it takes quite a bit of time to make them: from half an hour to an hour.

Magnets on the refrigerator with their own hands

Magnet on the refrigerator from salted dough

You will need:

- a glass of flour;

- 1/2 cup of salt (shallow);

- 1/4 cup of water;

- gouache;

- colorless varnish;

- cardboard;

- a pen;

- glue (for example, super-glue);

- A piece of magnetic tape two centimeters long and one centimeter wide.

First of all, make a dough for modeling, for this put in a bowl of flour, salt and water and mix everything (should get a pretty thick elastic mass, a consistency resembling clay).

Then roll the resulting dough with a rolling pin tothickness of about one centimeter. On the cardboard, draw a shape of what shape you want to make a magnet, for example, a heart. Cut out the workpiece, apply it and roll out the dough, then gently cut out the same piece of dough with a sharp knife. Cut out the figure in a warm place for about 24 hours.

At the end of time, color the front sidebillets gouache of any one color or at once with several colors. Allow the paint to dry completely, then coat the figure with a colorless varnish. After the varnish dries, glue the magnet to the super-glue to the wrong side of the workpiece. The magnet on the refrigerator is ready.

Magnet on the refrigerator of polymer clay

You will need:

- polymer clay;

- hot glue;

- shaped molds (you can use molds, for example, for biscuits);

- toothpick;

- a piece of magnetic tape;

- rhinestones or beads.

Take in hand a piece of polymer clay,roll it into a layer about 0.5-0.7 centimeters thick. Will put on the resulting layer shaped figurine and press. Obtained a blank of polymer clay.

Then use a toothpick to create an ornament on the workpiece. If you use a mold in the form of an animal to create a magnet, then you need a toothpick to shape your face.

Place the workpiece on a ceramic plate and send it to a preheated oven to 120-130 degrees for 20 minutes, then leave to cool at room temperature.

Using glue, glue a piece of magnetic tape to the underside of the workpiece, then decorate the front side of the magnet with rhinestones or beads (they can be put on the edge of the figure).

Magnet on the refrigerator from coffee beans

You will need:

- coffee beans;

- cardboard;

- glue;

- a pen;

- magnetic tape;

- A beautiful button;

- a bright satin ribbon 10 cm long and 0.5 cm wide.

On the cardboard, draw a heart shapea diameter of about 10 centimeters and cut it. Gently glue coffee beans to one side of the resulting preform, placing them as close as possible to each other. On the opposite side of the figure, glue a small piece of magnetic tape.

From the satin ribbon fold bow, then glue it on the front side of the magnet, then on the middle of this bow stick a bright button. A magnet made from coffee beans is ready.